The synchronization (1) is very good at 0.07%, the acrylic platter improves the value to 0.064%. Measurement laboratory: In the measurement of frequency response and crosstalk, spikes are recognizable, which are characteristic of arm resonances at 140, 280, and 520 Hertz (not shown).
Its standard Ortofon OM5E was converted into an OM10 for the needle exchange test, as it is also mounted on the Carbon Basic tonearm – we were initially interested in the properties of the drive and tonearm, rather than the long-known qualities of the different Ortofon needles. The hearing test started with the original Pro-Ject Debut, which has served as a comparison device in our listening room for years. A change that also reduces standby consumption to exactly zero.īuy on Amazon Last updated: at 21:08, More Info Pro-Ject Debut Carbon Sound Test The engine mount was revised, however, with the success that all three test samples in the listening room ran significantly less noisily than previous Debuts – even though the old plug-in power supply has now given way to a small transformer directly under the frame. The tried-and-tested synchronous motor with aluminum pulley serves as the drive and transfers its power to the plastic inner plate via flat belts.
As before, the platter is made of sheet steel with felt mat, but its weight increases from 1.3 to 1.6 kg, which together with the larger diameter almost doubles the moment of inertia.
PROJECT DEBUT CARBON EVO REVIEW FULL
However, the most important step in the direction towards high-end record players has been taken by the new platter, which is now finally making its rounds in the full 12-inch format, meaning that a full-length LP can be played without having its edge overhang two fingers’ width. Effective precision work: The O-ring motor suspension of the old models is still available, but is supplemented by a direct screw connection with two Sorbothane cushions. The developers, on the other hand, left the relatively thin headshell with a small amount of elasticity and a life of its own, which can also be measured. It is very stiff and due to the heterogeneous carbon fiber structure largely immune to resonances. The new arm corresponds in size and geometry to its metallic version from the classic debut model. It is mounted in a classic gimbal with steel tips in sapphire mirrors. The carbon tonearm brings carbon fiber into a whole new price segment. Even better, the cartridge, in this case, Ortofon 2M Red, is included, pre-assembled, and adjusted. As the name suggests, the tried-and-tested Debut entry-level model has benefited from the manufacturer’s increasing experience in processing carbon fiber – which makes it possible to attach your cartridge to a carbon-fiber tonearm for just over $400. Pro-Ject Debut Carbon: Constructionĭebut Carbon is the name of the latest series, and it alone includes three variants – which we had put to the test in full.
PROJECT DEBUT CARBON EVO REVIEW SERIES
Today the program is so finely differentiated that even someone who has decided to spend a maximum of $500 has four different model series to choose from. The Czech-Austrian vinyl giant Pro-Ject started more than 20 years ago with a single model, the construction of which dates back to the pre-reunification period – and which made posthumously socialism the best friend of the hi-fi beginner. Pro-Ject Debut Carbon Esprit SB (~ $600).Pro-Ject Debut Recordmaster with USB and Phono Preamp (~ $500).Pro-Ject Debut Carbon DC Turntable with Ortofon 2M Red Cartridge (~ $400).We went through it step by step.ĭisclaimer: If you purchase through links on our site, we may earn an affiliate commission. Pro-Ject launches the Debut Carbon turntable in three different versions.
0 kommentar(er)
